Call Today
Upgrade your OEM MERCEDES BENZ screen with our MERCEDES BENZ CLA Wireless CarPlay / Android Auto System. This system is compatible with 2013-2018 CLA Mercedes equipped with NTG 4.5, NTG 4.7 and NTG 5 command systems. This comprehensive video interface module will integrate all the features of Apple CarPlay / Android Auto onto your existing Mercedes CLA command system. Once installed, the system is ready for use without any dealer activation or coding required and DOES NOT require any cutting or splicing of OEM cables.
Mercedes gave the first CLA, the C117, a fixed tablet-style display standing above the center vents, and that screen is exactly where this kit puts wireless Apple CarPlay and Android Auto. Built for the 2014-2018 CLA, the module hides behind the factory radio and uses the harnesses already in the dash. Your four-door coupe keeps its original look inside, gains modern navigation and messaging apps, and never needs a dealer visit or a single spliced wire to get there.

The C117 CLA ran as a single generation, but its electronics did not stand still. Early cars shipped with NTG 4.5, found on 2014 builds and on the first 2013 examples, which this kit also supports even though the US model years on this page begin at 2014. Cars from 2015 through 2018 carry the NTG 5 family, listed on our order form as NTG 5.0 or 5.1. The two families use different connections behind the display, so the kit is configured to whichever one you select. Coverage ends at 2018; the redesigned CLA that eventually replaced the C117 moved to a newer factory platform that our kits do not support. When in doubt, match the menu design on your screen rather than the title on your registration.
There is no aftermarket double-DIN escape hatch in a CLA, the display is fixed and the dash was never designed for a swap, which makes an integration module the only clean path to CarPlay in this car. Everything installs behind the radio and can be removed without a trace. Once fitted, your phone connects over Bluetooth with no cable required, though a USB connection is included for wired use and charging.


You keep the CLA's factory controls too. The original buttons handle app selection, track changes, and volume, with voice requests going to Siri on an iPhone or Google Assistant on an Android device.
The optional flush mount camera earns its keep here too, since the coupe roofline and high trunk lip leave a smaller rear window than most sedans. It mounts on the trunk lip above the license plate and delivers a wide angle picture that stays usable in low light. Ordering is simple because the form asks just one technical question, which command system you have.
An adjustable lens model is offered for anyone mounting away from the plate area or driving a lowered car, since its viewing angle can be aimed by hand.
The module also accepts a front camera, which comes up on screen when you leave reverse and clears itself after fifteen seconds have gone by.

Our integration systems connect to the factory command system currently in your vehicle. Therefore it is imperative that we know which command system your vehicle is equipped with in order to ensure we send the correct wiring for your vehicle. Below are examples of the user interfaces of the different Mercedes Benz command systems.
THE COMMAND SYSTEM IN YOUR VEHICLE IS MORE IMPORTANT THAN THE YEAR.
Please note that the years listed are the year ranges of Mercedes Benz’s that typically have the corresponding command system. However, the year can vary slightly. Therefore it is more accurate to identify your command system based off of the design of the user interface. Please call or message before ordering if you are unsure of your command system. You can send a picture of your radio controls AND screen (while the vehicle is on) to sales@emeraldintegrations .


*** = Only for Apple Carplay / Android Auto interface



*Exact package contents may differ based on your vehicle specification and options chosen*
| Make | MERCEDES-BENZ |
|---|---|
| Year | 2013,2014,2015,2016,2017,2018,2019,2020 |